The Ultimate 0.2 nozzle 0.06mm and 0.04mm layers Quality Profile Guide — Resin-Like FDM Print Settings
Get resin-quality results from your FDM printer. NOW UPDATED FOR 0.04 layer heights!This is the complete settings reference behind the prints on the Krak Fox Studios channel — every value, every rationale, every slicer covered.What's inside (28 pages):→ Full 0.06mm 0.04mm / 0.2mm nozzle profile settings for Bambu Studio, OrcaSlicer, PrusaSlicer and Cura → Every setting explained — not just what to set, but why, so you can adapt intelligently → Separate values for Bambu A1 and H2D where they differ → Complete retraction, cooling, support, and filament settings → Step-by-step calibration workflow — temperature, flow, pressure advance, retraction, elephant foot → Quick-reference calibration table so you know exactly what to adjust per filamentThis isn't a quick-start cheat sheet. It's the full methodology — built from hundreds of hours of real-world testing, calibrated on real hardware, and verified by a community of makers who don't let dodgy settings slide.Whether you're dialling in your first 0.2mm nozzle or chasing the last fraction of quality from prints you're already happy with, this guide gives you the reasoning to make every adjustment count.Includes downloadable process files for Bambu Studio and OrcaSlicer (import and go, then calibrate per filament).Created by Krak Fox Studios — because FDM can look this good.
Get it → krakfoxstudios.gumroad.com